Finding alternative parts for the Benelli 2C is a constant challenge for the restorer. The following is a list I have compiled during the restoration.
|
| |
|
| PART |
SUPPLIER or ALTERNATIVE |
| |
|
| Air Filter |
Fram CA73PL (I am told this is now just called a CA73). Also, in Australia, Ryco A5 |
| |
|
| Front sprocket |
Yamaha DT175, 17 tooth |
| |
|
| Footpeg rubbers |
Same as Moto Guzzi V50. Possibly similar to many Yamaha. |
| |
|
| Stainless spokes |
Originals are painted silver. Stailess available from Central Wheel Components |
| |
|
| Petrol cap |
Same as certain Moto Morinis. These are still available new. |
| |
|
| Fork seals |
Two per leg. Any bearing shop. Take a sample. |
| |
|
| Bearings |
So far, all the bearings have been off-the-shelf at the bearing shop. Easy. Cheap. |
| |
|
| Fork seal dust covers |
Contact Domiracer |
| |
|
| The Special Tool |
For the swing-arm and flywheel nuts. Make one yourself. We did. CLICK HERE |
| |
|
| Connecting Rod Big End Bearings |
Prox International (Netherlands) Big End Cage # 22.182415. 15 needle, silver.
18 x 24 x 15mm. Packet says "HONDA" but possibly also KTM. |
| |
|
| |
| Do you know any parts which fit the Benelli 2C? I am particularly interested in finding out if there are any other pistons which can be used on this bike. Contact me with any of your tips or tricks. |
| |
| |
| |
